Blackout Math

Generator transfer switch and inlet box: what you need

A transfer switch and a power inlet box are how a generator feeds your home safely, and the makers of both say a licensed or qualified electrician installs them.

What each one does

A transfer switch moves your home’s wiring between utility power and generator power. A manual transfer switch goes with a portable generator. Generac says its HomeLink manual switch suits homeowners who only want to back up essential circuits and do not mind operating the backup system by hand. An automatic transfer switch goes with a home standby generator and switches without you.

A power inlet box is the box on the outside wall where the generator’s cord plugs in. Reliance Controls says its inlet box mounts on the outside of the building and is not for indoor use.

Who installs it

Reliance’s installation instructions say the inlet box and its wiring must be installed by a qualified electrician in compliance with all applicable electrical codes. Generac’s help center says that even though its manual transfer switch may be less complex than a full standby system, the wiring will still require a licensed electrician, and permitting and local codes must be followed, which vary by region.

For a home standby generator the transfer switch is part of the system you choose. Generac’s spec sheet for the 14 and 18 kW Guardian lists two options, a 100 amp 16 circuit switch or a 200 amp service rated smart switch, and the 22 and 24 kW sheet lists a 200 amp service rated switch. It also notes that the fuel pipe must be sized for full load, which is more installed work.

Never plug a generator into a wall outlet

The Consumer Product Safety Commission says never try to power house wiring by plugging a generator into a wall outlet, a practice known as backfeeding. It calls this extremely dangerous, an electrocution risk to utility workers and neighbors on the same transformer. A transfer switch and inlet box exist so you never have to.

Where the generator goes

The Commission’s guidance for portable generators is to operate them outdoors only, at least 20 feet from homes and buildings, with the exhaust directed away from windows, doors and vents, and never in a home, garage, basement or shed. Reliance says to locate an engine-driven generator away from doors and windows to avoid carbon monoxide building up.

A power station has no engine and no exhaust, which is why many people choose one for a short outage. If you want one to feed your home panel, the same transfer switch and electrician rules apply.

What this means for the calculator

The calculator shows an installation note for each product: Generac’s own spec sheet words for the standby generators, and the same electrician guidance for the others. Start by finding the load you need to cover, then see which products reach it.

Find what covers your load